DanBranDaMan

35768 pts ยท September 5, 2019


Those spines aren't actually that hard. They're more pointy leaf than spike.

2 years ago | Likes 22 Dislikes 0

I work in regulatory compliance. Same boat. You literally can't sell a product without complying with standards, but we are seen as a roadblock...

2 years ago | Likes 2 Dislikes 0

First one, then the other

2 years ago | Likes 5 Dislikes 0

If it were jointed rail, you'd see bolt plates every 40 ft or so. This is welded rail.

2 years ago | Likes 1 Dislikes 0

This is at least his second rodeo.

2 years ago | Likes 1 Dislikes 0

Slower you......actually, that's the perfect speed.

3 years ago | Likes 1 Dislikes 0

Whales dive deep where it's cold and need to come back to the surface to a) breathe and b) warm up. Ocean sunfish do the same thing, go to the surface to sunbathe and warm up before diving for food.

3 years ago | Likes 19 Dislikes 0

Woosh

3 years ago | Likes 1 Dislikes 0

This feels like Omega Mart

3 years ago | Likes 2 Dislikes 0

I do not work that job anymore, nor drive forklifts anymore. I mostly carry it for the memes.

3 years ago | Likes 1 Dislikes 0

They forgot to fill in the expiration date on mine. It was supposed to be good for 1 year, but I've had it for nearly 10 and I carry it in my wallet just in case.

3 years ago | Likes 1 Dislikes 0

Is this a catversation?

3 years ago | Likes 1 Dislikes 0

Bad drivers never miss their exits.

3 years ago | Likes 2 Dislikes 0

Do you have a different link? That one isn't loading for me

3 years ago | Likes 1 Dislikes 0

Doing gods work my dude

3 years ago | Likes 2 Dislikes 0

He's trying with both brain cells!

3 years ago | Likes 5 Dislikes 0

Standard forklifts (like the one seen in the video) are in the 5-20k lbs range. Heavy duty ones for moving factory equipment can be around 80k lbs, and require their own semi to move it.

3 years ago | Likes 1 Dislikes 0

I played drums for about 5 years, and it was amazing how simple and simultaneously difficult it was playing with a basic kit.

3 years ago | Likes 4 Dislikes 0

CSA is a Canadian standards group. The C means Canada compliant, and the US means US compliant (for national deviations from the standard). The Omega symbol in the white triangle says that the boot sole is rated for 18,000 volts with 1 milliamp leakage current.

3 years ago | Likes 6 Dislikes 0

PLA. I have yet to experiment with ABS, as my current setup is in the house so that probably won't happen.

3 years ago | Likes 1 Dislikes 0

It's annoying enough to complain about it, but not enough to do anything about it.

3 years ago | Likes 2 Dislikes 0

It said he shot off the circuit breaker. Even a UPS is only designed to supply backup power for a few minutes, especially on something as power hungry as a freezer.

3 years ago | Likes 29 Dislikes 0

I did have to add about 15 lb of sand in the middle to get it to sit at the correct water level, so hopefully the 3D print is strong enough to not mirror the real thing. I think it will be fine though.

3 years ago | Likes 1 Dislikes 0

Thanks dude! My favorite is when the ship is either coming/going, so you get the long straight deck with the 18 hatches, plus those waves.

3 years ago | Likes 2 Dislikes 0

We had the marsh on the lake by my house catch fire a month ago. They think it was from a cigarette butt from the freeway.

3 years ago | Likes 4 Dislikes 0

And hopps from the Miller brewery in MKE.

3 years ago | Likes 1 Dislikes 0